Replacing SP-LAMP-060 projector lamp

Getting to know the lamp hour

Extending lamp life

Replacing the SP-LAMP-060 lamp

WARNING

• To reduce the risk of electrical shock, always turn the projector off and disconnect the

power cord before changing the SP-LAMP-060 lamp.

• To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes

before replacing the lamp.

• To reduce the risk of injuries to fingers and damage to internal components, use caution

when removing lamp glass that has shattered into sharp pieces. Before replacing the

lamp, clean the lamp compartment and dispose of cleaning materials. Be careful of sharp

edges in the lamp compartment. Wash hands after lamp replacement.

• Only InFocus certified SP-LAMP-060 lamps are tested with this projector. Use of other lamps may cause

electrical shock and fire.